2GIG-DW10-345 - 2GIG Wireless Thin Door/Window Alarm Contact
2GIG-DW10-345 Product Description:
The 2GIG-DW10-345 wireless alarm contact is designed to be installed on doors, windows, jewelry boxes, and many other objects that open and close. This thin door/window contact sends alarm signals to the 2GIG control panel, when a magnet mounted near the sensor is moved away from or closer to the sensor's transmitter. The DW10-345 sensor is also equipped with cover tamper for additional security.
The DW10-345 communicates with the control panel using the 345 MHz frequency. When the magnet (which is mounted near the sensor) moves away from or closer to the door contact's sensor, signals are transmitted to the control panel. The door contact also has an external input that accepts connections from normally-closed (NC) dry contact devices.
Product Features:
- For narrow applications, sensor is only 3/4" wide
- Fully supervised
- Rare earth magnet
- Lithium battery
- Supports internal and external contacts
- Can be used for two zones of protection
- 345 MHz
- ETL Listed
2GIG-DW10-345 Product Specifications:
- Wireless Signal Range: 350 ft (106.7 m), open air, with Wireless Control Panel
- Code Outputs: Alarm; Alarm Restore; Supervisory; Low Battery; External Alarm; External Restore; Tamper; Tamper Restore
- Transmitter Frequency: 345.00 MHz (crystal controlled)
- Unique ID Codes: Over one (1) million different code combinations
- Supervisory Interval: 70 minutes
- External Input: Accepts N/C dry contact devices
- Magnet Dimensions (L x W x D): 1.3 x 0.435 x 0.312 in (3.3 x 1.1 x 0.79 cm)
- Magnet Type: Rare Earth
- Sensor Dimensions (L x W x D): 2.59 x 1.03 x 0.49 in (6.58 x 2.62 x 1.24 cm)
- Weight: 1.1 oz (31.2 g)
- Housing Material: ABS Plastic
- Color: White
- Operating Temperature Limits: 32° to 120°F (0° to 49°C)
- Relative Humidity: 5-90% Non-Condensing
- Battery (included, not installed): Two (2) CR 2032 or equivalent Lithium batteries
- Certification: Anatel, ETL, FCC, Industry Canada, and NOM
2GIG-DW10-345 Product Documents:
• 2GIG-DW10-345 Wireless Thin Door & Window Alarm Contact Data Sheet
• 2GIG-DW10-345 Wireless Thin Door & Window Alarm Contact Installation Instructions (in English)
• 2GIG-DW10-345 Wireless Thin Door & Window Alarm Contact Installation Instructions (in French)
• 2GIG-DW10-345 Wireless Thin Door & Window Alarm Contact Installation Instructions (in Spanish)
• 2GIG-DW10-345 Wireless Thin Door & Window Alarm Contact Installation Instructions (in Portuguese)
2GIG-DW10-345 Installation Guidelines:
- Mount Sensors within 100 ft (30 m) of the Control Panel: Although the transmitter may have a range of 350 ft (106.7 m) open air, the sensor location can have a significant effect on range. In open/unobstructed situations, the transmitter range may be greater. In adverse wireless conditions, changing the sensor orientation may lead to improved range.
- Mount Sensors at Least 4.7 in (12 cm) Above the Floor: Placing sensors slightly above floor level helps to minimize possible sensor damage.
- Single vs. Double Door Installation: For single?door installation, mount the sensor on the door frame and the magnet on the door. For double?door installation, mount the sensor on the least?used door and the magnet on the most?used door.
- Do Not Expose Sensors to Moisture or Extreme Temperature: It is best to mount sensors in a dry location where the operating temperature do not exceed 32° to 120°F (0° to 49°C).
- Keep Sensors and Magnets Away from Metal/Metallic Surfaces: To keep sensors and magnets away from metal or metallic surfaces (for example, foil wallpaper), it is recommended that you use spacers (not included). You should also avoid mounting sensors in areas where there is a large quantity of metal or electrical wiring (for example, near a furnace or in a utility room).
- Align Magnet with Sensor: Make sure the alignment arrow on the magnet points to the center alignment mark on the sensor.
2GIG-DW10-345 Product Includes:
- (1) Thin Door/Window Contact
- (1) Rare Earth Magnet
- (2) Phillips Head Screws
- (2) Lithium Coin Batteries
- (2) Adhesive Foam Tape
- (1) 12 in (30 cm) Wire Lead
Product Reviews
Parts, February 24, 2023
Perfect Option, February 23, 2023
Awesome Product!!, February 12, 2022
Very handy with little ones around, July 8, 2021
Posted By: Steven
3 people found this review helpful
Installed this on my front door at the top, and it was incredibly easy. Just peel off the 3M tape, and stick it and then it's installed. Now i can use the contact sensor within the app using a routine to tie it into other home automation programs! Using this, it's pretty easy to program your lights/gadgets within your house to detect when you leave/enter your home!
3 people found this review helpful
Installed this on my front door at the top, and it was incredibly easy. Just peel off the 3M tape, and stick it and then it's installed. Now i can use the contact sensor within the app using a routine to tie it into other home automation programs! Using this, it's pretty easy to program your lights/gadgets within your house to detect when you leave/enter your home!
