GDC1 - Telguard Universal Z-Wave Garage Door Automation Control Switch
Telguard GDC1 Product Description:
The Telguard GDC1 is a Z-Wave garage door control switch compatible with any automatic garage door opener connected to a sectional garage door with all entrapment protections in place. Use the GDC1 with your home automation system to receive notifications if the garage door has been opened when it shouldn't be, ensure the garage door is closed at a specific time every night or even reclosed after a fixed amount of time every morning. If your Z-Wave gateway has a mobile app, you can remotely control or monitor the garage door from anywhere.
The GDC1 works with any Z-Wave system, but it works best with Telguard's HomeControl interactive service offered through GeoArm. Currently available for DSC IMPASSA and PowerSeries security panels, as well as the 2GIG Go!Control wireless control panel, users of Telguard HomeControl have the ability to remotely arm and disarm their security systems, turn on and off lights, access locks, adjust thermostats, watch video, and now control their garage door.
The GDC1 meets UL 325 safety guidelines for unattended operation. The unit provides five seconds of audible and visual warnings prior to remote movement. It also has the ability to cancel movement locally during the warning period. Finally, it suspends unattended operation after two consecutive failed closing attempts.
Furthermore, HomeControl offers the ability to tie into all of the security panel's sensors, such as motion detectors, door and window contacts, etc.
Product Features:
- Compatible with any Z-Wave controller supporting the binary switch command class.
- Works best with Telguard HomeControl and with other interactive platforms including: Icontrol Networks, 2GIG, DSC, and many others.
- Meets UL 325 safety guidelines for unattended operation.
- Check whether the garage door is up or down, and control it remotely with the Telguard HomeControl mobile app.
- Schedule the garage door to close while locking all the doors at a specific time each night or simply when you go to sleep.
- Automatically close the garage door, when you leave for the day or go on vacation.
- For additional comfort, take a picture or video clip when the garage door is opened or closed.
Telguard GDC1 Product Specifications:
- Power: 120VAC, 50/60 Hz.
- Z-Wave Frequency: 908.42 MHz.
- Command Class: Binary Switch
- Range: Up to 100 feet between the wireless controller and /or the closest Z-Wave receiver module
- Inclusion: Network Wide
- Certifications: FCC, Z-Wave
Telguard GDC1 Product Documents:
• Data Sheet for Telguard GDC1 Garage Door Control Switch
• Installation Guide for Telguard GDC1 Garage Door Control Switch
• Compatible for Telguard GDC1 Garage Door Control Switch
Telguard GDC1 Product Includes:
- The GDC1
- Magnetic Garage Door Sensor
- Two (2) Preinstalled Cables
- Power Cord Preinstalled to GDC1
- Mounting Hardware
Product Reviews
Good Quality and Good Features, January 5, 2022
Easy install for added functionality, December 3, 2021
Posted By: baldwin
1 people found this review helpful
This was very intuitive, and took about an hour to install - which included adding a new electrical outlet to plug the unit into. The APP is pretty simple, and connection to WiFi was quick and painless. I?m very happy with this product. My opener problem is solved and it added a lot of functionality as well.
1 people found this review helpful
This was very intuitive, and took about an hour to install - which included adding a new electrical outlet to plug the unit into. The APP is pretty simple, and connection to WiFi was quick and painless. I?m very happy with this product. My opener problem is solved and it added a lot of functionality as well.
