PROSiXMED - Resideo Honeywell Home Wireless Personal Medical Transmitter (for ProSeries Control Panels)
ProSeries PROSiXMED Product Description:
The Resideo Honeywell Home PROSiXMED is a wireless bi-directional personal medical transmitter that is intended for use with control panels that support PROSiX-Series devices. The PROSiXMED 1-button wireless sensor is compatible with the ProSeries PROA7, ProSeries PROA7C, ProSeries Canada PROA7CN, ProSeries PROA7PLUS, ProSeries PROA7PLUSC or ProSeries Canada PROA7PLUSCN all-in-one wireless touchscreen control panels.
The PROSiXMED wireless sensor is simple to activate, just press and hold the button about 3 seconds until the LED flashes. The PROSiXMED has the following LED indications; Green Flashing lights when unit is transmitting, Red Flashing lights indicate low battery (lights during button press).
To enroll the PROSiXMED, set the controller in Programming Mode, press and hold the button for about 3 seconds until the LED flashes green to activate the enrollment process. When done, the LED lights solid green for 3 seconds to confirm enrollment. Once enrolled, verify adequate signal strength by conducting a sensor test. Once enrolled, the PROSiXMED cannot be used with another system until it is removed from the current controller.
If the device is enrolled in a panel different than the intended panel, and you are unable to delete it from the unintended panel, reset the device to factory default setting: Press and hold the button for 15 seconds. When successful the LED flashes. The PROSiXMED device self-deletes from the panel it was enrolled in. This procedure is available for 24 hours after enrollment with a panel and the device remains powered (battery installed).
Product Features:
- 128-bit AES Encryption (PROSiX-Series)
- Transmission range up to 300 feet
- Belt, Lanyard, Wristband Included
- 1-Button
- Bi-Directional
- LED Indicators
- Medical Alert Transmitter
ProSeries PROSiXMED Product Documents:
• ProSeries PROSiXMED Wireless Personal Medical Transmitter - Data Sheet
• ProSeries PROSiXMED Wireless Personal Medical Transmitter - Installation and Setup Guide
• ProSeries PROSiXMED Wireless Personal Medical Transmitter - Quick Installation Guide
ProSeries PROSiXMED Product Specifications:
- Dimensions (H x L x W): 0.5" x 1.5" x 1.5" (13mm x 38mm x 38mm)
- Lanyard: Included
- Wrist Band: Included
- Belt Clip: Included
- Transmission Range: 300 ft (92 meters)*
- RF Frequency: 2.4 GHz
- Battery: 1 x 3V Coin Cell, Duracell DL2450, Panasonic CR2450, Energizer CR2450, Resideo BL3-0004 (CR2450)
- Encryption: 128-bit AES
- Operating Temperature: 32° to 122°F (0° to 50°C)
- Relative Humidity: 95% max. (Agency Compliance 93% max.), non-condensing
- Agency Approvals: FCC/IC, ETL Listed to UL 1023, UL 985, UL1637, Certified to ULC ORD-C1023, ULC-S545
- Authorized Countries: US, Canada, Latin America
* Range can vary depending on building construction, wireless interference, and other factors.
Product Reviews
Reliable medical alert service., January 23, 2022
Posted By: LAUREN
1 people found this review helpful
Got this device for my grandfather after he'd had a fall. I wanted him to be more protected in case he ever has a worse fall or another problem and needs help immediately. We?re satisfied that this is a medical alert system we can rely on.
1 people found this review helpful
Got this device for my grandfather after he'd had a fall. I wanted him to be more protected in case he ever has a worse fall or another problem and needs help immediately. We?re satisfied that this is a medical alert system we can rely on.
