The Resideo Honeywell Home PROTAKEOVER is a single, simple plug-in wireless takeover module that enables ProSeries panels to communicate with multiple wireless security sensor protocols. The PROTAKEOVER module is compatible with the ProSeries PROA7, ProSeries PROA7C, ProSeries Canada PROA7CN, ProSeries PROA7PLUS, ProSeries PROA7PLUSC or ProSeries Canada PROA7PLUSCN all-in-one wireless touchscreen control panels.
The PROTAKEOVER allows PRO-Series control panels the ability to communicate with previously installed wireless sensors and modules that transmit on the 319.5 MHz, 345 MHz, 433.92 MHz and 433.92MHz frequencies. The takeover module connects directly to the control panel and is powered via the control panel's connection. This module should not be used with life safety sensors such as Smoke, Heat or CO detectors.
When installing the PROTAKEOVER, please remember to ensure that all electrical power is removed from the control panel prior to installation. Unplug the power supply and disconnect the backup battery.
Product Features:
Easy plug-in installation and enrollment
Protocols supported include 5800-Series, 2GIG, DSC (North America), ITI and BOSCH
Diversity antennas for increased coverage located in the All-in-One panel back plate
Power supply regulation on board - module is powered from the panel and is supported by the back-up battery should AC loss occur
Protocol selection is based on a single rotary switch
The Resideo Honeywell Home PROTAKEOVER is a single, simple plug-in wireless takeover module that enables ProSeries panels to communicate with multiple wireless security sensor protocols. The PROTAKEOVER module is compatible with the ProSeries PROA7, ProSeries PROA7C, ProSeries Canada PROA7CN, ProSeries PROA7PLUS, ProSeries PROA7PLUSC or ProSeries Canada PROA7PLUSCN all-in-one wireless touchscreen control panels.
The PROTAKEOVER allows PRO-Series control panels the ability to communicate with previously installed wireless sensors and modules that transmit on the 319.5 MHz, 345 MHz, 433.92 MHz and 433.92MHz frequencies. The takeover module connects directly to the control panel and is powered via the control panel's connection. This module should not be used with life safety sensors such as Smoke, Heat or CO detectors.
When installing the PROTAKEOVER, please remember to ensure that all electrical power is removed from the control panel prior to installation. Unplug the power supply and disconnect the backup battery.
Product Features:
Easy plug-in installation and enrollment
Protocols supported include 5800-Series, 2GIG, DSC (North America), ITI and BOSCH
Diversity antennas for increased coverage located in the All-in-One panel back plate
Power supply regulation on board - module is powered from the panel and is supported by the back-up battery should AC loss occur
Protocol selection is based on a single rotary switch
