The Alula RE653 is a Connect+ encrypted, weatherproof, wireless outdoor PIR motion detector. The RE653 protects outdoor areas with two IR sensors, for advanced animal immunity, and transmits an alarm when motion is sensed from up to 15 feet (5 meters) away. The RE653 is battery-powered and enclosed in a IP55 weatherpoof casing to operate in harsh environmental conditions.
To enroll the RE653, begin by placing the panel into wireless enrollment mode and sending an enrollment signal from the motion sensor. Alternatively, the motion sensor can be enrolled by scanning its bar code using the HeliLink app or by entering its 8-character serial number on the interactive GeoArm web portal.
To install the RE653, begin by loosening the mounting plate screw and removing the motion sensor body. Next punch out the mounting holes and secure the mounting plate to a surface. Finally place the motion sensor body back onto the mounting plate and tighten the mounting plate screw.
To change the RE653 sensor direction, you have to remove the cover and adjust the direction locking part to turn the sensor. After changing the sensor direction replace the direction locking part and cover. The detection length can be also be changed from the default 16.5 feet (5m) detection length to a 6.5 feet (2m) detection length by rotating the lower lens 180 degrees. Do not remove the upper lens.
Product Features:
IP55 weatherproof enclosure
Adjustable detection range
Two IR sensors for advanced animal immunity
5m or 2m range and 190 degree field of view (95 degrees to each side)
The Alula RE653 is a Connect+ encrypted, weatherproof, wireless outdoor PIR motion detector. The RE653 protects outdoor areas with two IR sensors, for advanced animal immunity, and transmits an alarm when motion is sensed from up to 15 feet (5 meters) away. The RE653 is battery-powered and enclosed in a IP55 weatherpoof casing to operate in harsh environmental conditions.
To enroll the RE653, begin by placing the panel into wireless enrollment mode and sending an enrollment signal from the motion sensor. Alternatively, the motion sensor can be enrolled by scanning its bar code using the HeliLink app or by entering its 8-character serial number on the interactive GeoArm web portal.
To install the RE653, begin by loosening the mounting plate screw and removing the motion sensor body. Next punch out the mounting holes and secure the mounting plate to a surface. Finally place the motion sensor body back onto the mounting plate and tighten the mounting plate screw.
To change the RE653 sensor direction, you have to remove the cover and adjust the direction locking part to turn the sensor. After changing the sensor direction replace the direction locking part and cover. The detection length can be also be changed from the default 16.5 feet (5m) detection length to a 6.5 feet (2m) detection length by rotating the lower lens 180 degrees. Do not remove the upper lens.
Product Features:
IP55 weatherproof enclosure
Adjustable detection range
Two IR sensors for advanced animal immunity
5m or 2m range and 190 degree field of view (95 degrees to each side)
