Application Flexibility:

• Z-wave PLUS certified, S2 encryption
• Compatible with Z-Wave and Z-Wave Plus compliant gateways, hubs, and controllers
• 3H/2C heat pump or 2H/2C conventional systems
• Dual Fuel and Aux Heat Lockout Temperature F/C and Humidity Display

Easy Installation:

• Flexible Power: 3AA batteries, hardwired (C-Wire), or both
• Easy wiring with the UWP Mounting System
• Seamless homeowner handoff, letting you move on to your next project

User Friendly:

• Large, modern and intuitive touchscreen display
• Energy saving with onboard scheduling or with cloud scheduling, plus remote control temperature settings
• Z-Wave 5.0 chipset encryption
• Extended wireless range with Z-Wave Plus and fast communication speeds for smooth operation
• 7-day, 5-1-1 or 5-2 day programmable, nonprogrammable, or occupancy controlled with Z-Wave panel/app integration

• Model Number: TH6320ZW2003
• Model Name: T6 Pro Z-Wave Thermostat
• Model Description: Programmable Z-Wave thermostat with touchscreen
• Display Size: 6.55 sq. in.
• Stages: Up to 3 Heat / 2 Cool Heat Pump, Up to 2 Heat / 2 Cool Conventional
• Z-Wave Thermostat Dimensions (H x W x D): 4.09" x 4.09" x 1.06" in. (104 x 104 x 27 mm)
• UWP Mounting System Dimensions (H x W x D): 2-9/32" x 2-13/64" x 2-43/64" in. (58 x 56 x 10 mm)
• Heat Temperature Range: 40°F to 90°F (4.5°C to 32°C)
• Cool Temperature Range: 50°F to 99°F (10°C to 37°C)
• Operating Ambient Temperature Range: 37°F to 102°F (2.78°C to 38.89°C)
• Operating Relative Humidity: 5&per; to 90&per; (non-condensing)
• Temperature Sensor Accuracy: Thermostat ±1.5°F at 70°F (0.85°C at 21.0°C)
• Regulations: FCC § 15.19 (a)(3), IC RSS-GEN, FCC Warning (Part 15.21) (USA only), FCC - 47 CFR § 15.105 (b)
• Warranty: 5-year limited
• Z-Wave Radio:
  -Frequency (USA and Canada): 908.42 MHz
  -Certified: Z-Wave Plus
  -Generic Device Type: Thermostat
  -Node type (C-wire): Always On Slave (AOS)
  -Node type (Battery): Listening Sleeping Slave (LSS)
  -Z-Wave Chipset: ZM5202AU
• Supported Z-Wave Command Classes:
  Z-Wave Plus Info V2
  Supervision V1
  Transport Service V2
  Association V2
  Version V2
  Association Group Information V2
  Basic V1
  Battery V1
  Clock V1
  Configuration V4
  Device Reset Local V1
  Manufacturer Specific V2
  Sensor Multilevel V5
  Notification V3
  Powerlevel V1
  Security 2 V1
  Thermostat Fan Mode V3
  Thermostat Fan State V1
  Thermostat Mode V3
  Thermostat Operating State V1
  Thermostat Setpoint V2

Notes:

• Some of the reported modes are manufacturer specific if not covered by the Z-Wave command class.

• Value 0x00 Device goes to Energy saving setting (AWAY mode)
• Values 0x01-0x63 and 0xFF Device goes to Comfort setting (HOME mode)

• Notification V3 is enabled by default (Power management alarm handling). Notification Type: Power Management (0x08). Notification Events: AC mains disconnected (0x02), AC mains re-connected (0x03).

• All supported Z-Wave Command classes are supported securely (S2 unauthenticated), except Transport Service V2, Security 2 V1 and Z-Wave Plus Info V2

• Group ID: 1; Maximum Nodes: 1; Description: Z-Wave Plus Lifeline
• Command Classes reported: Multilevel Sensor, Thermostat Setpoint, Thermostat Mode
• Thermostat Fan Mode, Thermostat Operating State, Thermostat Fan State, Basic

• We strongly recommend that installation is performed by a trained HVAC technician.
• Read the enclosed instructions carefully before installing the new T6 Pro Z-Wave Programmable Thermostat.
• ELECTRICAL HAZARD: Can cause electrical shock or equipment damage. Disconnect power before beginning installation.
• To prevent abnormal operation, it is highly recommended to configure the installer setup and set the thermostat to correct HVAC system before including the thermostat to Z-Wave network. If the configuration must be changed, first EXCLUDE the thermostat from the network, change the thermostat configuration, and INCLUDE the thermostat back to the network.
• Before disconnecting wires from the existing thermostat, label the wires with the terminal markings from the old thermostat and record them. Take a picture of the old wiring.
• Use 3 new AA batteries in the thermostat.

• Designed for battery operation (3 x AA batteries) or for 24 VAC power operation (via a "C" or common wire).
• Compatible with most single and multi-stage conventional and heat pump systems.
• Designed to work with any Z-Wave compliant controller or gateway; however, a security enabled Z-Wave Plus Controller is recommended to fully utilize all thermostat features.
• Works with millivolt systems
• Does not work with electric baseboard heat (120-240V)