WT00Z5-1 - 2GIG Z-Wave In-Wall Mount 3-Way Switch/Dimmer
WT00Z5-1 Product Description:
The WT00Z5-1 is a smart wall-mount 3-way switch/dimmer designed to be used with the 2GIG GoControl panels. With the WT00Z5-1 you control any device, light or lights from anywhere you have power, with no new wiring needed. The Smart 3-Way Switch can control up to 5 dimmers and 5 on/off switches, with no extra wires. No more traveler wires, no more limits.
The WT00Z5-1 Wall Mount Accessory Dimmer Switch allows remote ON/OFF control and dimming of lights controlled by associated Z-Wave modules, creating virtual 3-way switches. The WT00Z5-1 controls no load directly, so it can be wired anywhere power is available, without the need for a traveler wire. The WT00Z5-1 3-Way Wall Mount Accessory Dimmer/Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown and almond.
Product Features:
- Supports multi-tap scene control for up to 8 programmed Scenes
- Creates multi-switch "3-way" circuits without the need for a traveler wire
- Replaceable Decorator trim ring design - available in black, brown and almond
- Z-Wave Plus
- Turn the Associated device ON and OFF
- Dim the Associated device
- Add or Remove the WT00Z5-1
- Over-the-air firmware update by the gateway or static Controller
- Assign the WT00Z5-1 to a specific Group/Scene and/or to include the Associated device as part of ALL ON or ALL OFF system commands
- Lifeline function which automatically notifies the Associated modules and the network that a manually reset device is no longer in the network, thus, the corresponding Association becomes invalid
Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to this technical bulletin.
WT00Z5-1 Product Specifications:
- Signal (Frequency): 908.42 MHz/916 Mhz
- Power: 120 VAC, 60 Hz
- Load: does not directly control a load. Another Z-Wave device is required
- Range: Up to 130 feet line of sight between the controller and/or the closest Z-Wave device
- Network wide inclusion
- Connect up to 5 devices to create virtual 3,4,5,6,7-way operation
- Requires Minimote
- Security beaming
